Laying Lineflex With Spray Adhesive Download PDF

A guide to laying Lineflex Fleece Backed EPDM membrane using spray contact adhesive.

Step 1

The deck must be dry and clean before laying the membrane. Spray apply contact adhesive to both deck and fleece and allow to touch dry.

Step 2

Carefully mate the membrane onto the adhesive and repeat the process on the other side.

Step 3

Carefully position adjoining sheet, overlap by 50mm and adhere as before.

Step 4

Seal the rubber with a hot air welder using a silicone roller at a rate of 2.5m per minute at 220 degrees (level 4).